Xiaomi router ax1800 detailed lazy bag 2023

▲ The network interface of the AX1800 router is designed on the back of the fuselage. It is designed with 3 Gigabit adaptive LAN ports and one adaptive WAN port.In terms of settings, select the bridge mode on the master node, and then select the wired backhaul. Velop is recommended, which is more reasonable and simpler.You can search for LINKSYS Velop AC3900M, this is three nodes, about 200 square meters, full coverage.I also just bought the Xiaomi router ax1800. It is practical and not bad. It can switch intelligently without dropping the line. ▼Compare the performance of Huawei AX3 Pro under the same test conditions.

Chapter content

The Xiaomi Router AX1800 will be available for pre-sale at 5:15 on May 10 [click here]. A deposit of RMB 30 can be redeemed for RMB 60, and the hand price is RMB 299 (about HK$327).Why does Xiaomi like to copy the appearance of ASUS so much? After copying the previous ac2100, this one copied it again, and claimed to have won some design award. I am dizzy, it is shameless to the extreme.In the end, I didn’t buy the Redmi 2100,5, the 7615G is 2.4, 2G is almost enough but 2X128 is enough, and the main reason is that it has good heat dissipation, and the memory is 64M. Otherwise, it’s basically 6.In the end, I didn’t choose WiFi6, because I saw some replies saying that some old WiFi can’t connect to WiFi6, so why use WiFiXNUMX, hehe.

However, at present, only computer products can use 160Mhz bandwidth.In addition, it should be noted that the heat of Huawei AX3 Pro is very large, and it is necessary to take good heat dissipation measures in summer.The Xiaomi router AX1800 uses a 4-core CPU+single-core NPU configuration.Among them, the NPU is the network acceleration engine of the processor, which is specially used to process and forward continuous small data packets. In theory, it can increase the routing throughput by 21%, reduce the data occupation of the CPU, and reduce the CPU usage load.As an upgraded product of the Xiaomi router AX3000, the Xiaomi router AX1800 is still very cost-effective. For 349 yuan, you can buy a WiFi 160 router with 2976M bandwidth, dual-band concurrent wireless rate up to 6Mbps, support for Mijia Changkuailian, and wider signal coverage.

Note, the WIFI name of Xiaomi router starts with xiaomi_. The power supply of the 360 ​​is stronger, and the power amplifier may be better, but I am afraid that it will be harassed by advertisements. I have used a 360N4 mobile phone before, and then it automatically downloads garbage apps and installs them every day.It was reported on the Internet that the 360 ​​router also has this problem, and I didn't like it instantly. ▼Tested Xiaomi AX1800 under ideal conditions, the limit speed of 5G signal is 793Mb/s.Although it did not reach the theoretical limit speed, this result is not bad for a router with a price of more than 200. If it is under the wifi5 standard, the measured speed is at most less than 600Mb/s.

It adopts dual-core four-thread CPU processor, supports dual-band WiFi concurrency and data forwarding of all Gigabit Ethernet ports, and supports Xiaomi Mesh technology, allowing multiple routers to form a Mesh network, key intelligent networking, and seamless roaming of devices regardless of large-scale households or up and down Jump layer, can cover high-speed network.Configure 1 Gigabit WAN port and 3 Gigabit LAN ports to make full use of the operator's Gigabit bandwidth to achieve high-speed broadband access.The Xiaomi router AX1800, which is both powerful and beautiful, is a wireless router with a lot of praise and a very wide user group on the market.Stable performance and powerful features give you the most reliable network, field-proven to provide maximum uptime.

Judging from our actual machine experience, the Xiaomi AX1800 WIFI6 router has indeed achieved these points. The installation of the AX1800 is the same as other Xiaomi routers we have experienced in the past. The installation is very simple. Just install the Xiaomi WiFi mobile app on the mobile phone. Under the guidance of the APP, we can easily initialize the router. The whole setting process It only takes less than 3 minutes.First of all, the biggest selling point of Huawei AX3 Pro is the support for 160MHz. If your receiving terminal supports 160MHz bandwidth, there is no doubt that Huawei AX3 Pro will provide you with faster speed.

It can be seen that the average delay of the 2.4G signal is about 12ms, and the average delay of the 5G signal is about 3ms, and the delay performance is almost the same as that of the Xiaomi AX1800.In the webpage access speed test, it can be found that the 3G signal performance of Huawei AX5 Pro is even better, but the performance of Xiaomi AX2.4 is better under 1800G signal, and each has its own winners and losers. The delay of the 2.4G signal is about 11ms. Since the 5G signal rate is faster and the test environment has less interference, the delay performance under the 5G signal has been greatly improved. The average delay of pinging the gateway is about 4ms.The access speed of the web page has also been improved accordingly. It takes 155ms for the study room and only 100ms for the open area. ▼After testing, the signal strength of Xiaomi AX1800 at 6 points in the whole house is as follows.

The object of this comparison is the R7000 in my home. R7000 has been the main router in my home for a long time in the past. I am satisfied with the signal strength. Let’s compare Ax1800 and R7000 this time to see how it works.According to the manual, the AX1800 uses a deeply customized Openwrt system, which means that the bottom layer uses the Openwrt code. The Openwrt system must be familiar to everyone, and it is too powerful. I won’t explain too much here.I hope that the masters of Enshan will be more helpful. In this way, all the soft and hard routers at home can be replaced to meet various special needs.The Xiaomi AX1800 router supports Wi-Fi 6. The theoretical transmission speed of the router in the 2.4GHz frequency band is 574Mbps, and the maximum theoretical transmission speed of the router in the 5GHz frequency band is as high as 1201Mbps.The router also supports OFDMA technology. OFDMA technology allows the router to complete the data transmission of 8 devices with only one transmission, which effectively and greatly reduces the delay of the network.

In the process of experiencing the Xiaomi AX1800 WIFI6 router, I used a mobile phone that supports Wi-Fi 6 to connect to the 5GHz network of this router, and tried two games, "Glory of the King" and "Peace Elite".In the process of playing the game "Honor of Kings", the delay of the game network is basically maintained at about 60ms, and occasionally there will be a short delay of about 100ms.Xiaomi router ax1800 In the process of playing "Peace Elite", the game delay has been maintained at about 30ms. In the nearly two hours of the trial game, the network delay has been very stable without large fluctuations.In addition, AX1800 also supports Mesh. Two AX1800 Mesh networking can basically ensure that all areas of the home are within a wall of 5G band WiFi. Coupled with the powerful wall penetration performance of AX1800, a perfect Internet experience can be achieved. Under the 5G frequency band, if only one wall is passed through, the two are still equal, and both can run to the full bandwidth.

In addition, I hope that Xiaomi can upgrade more functions in the future to satisfy our infinite desire.In terms of performance configuration, Xiaomi router AX3000 is equipped with Qualcomm IPQ5000 platform, using dual-core 1GHz CPU + single-core 1GHz NPU.Since the NPU supports the network acceleration engine, it can reduce the burden on the CPU, independently process network data traffic, and greatly improve the data processing capability and operating efficiency.In addition, the Xiaomi router AX3000 is also equipped with 256MB RAM running memory, which is very conducive to the connection of multiple devices at home, so that it can be more stable when multiple devices are connected at the same time, and the probability of network delay is reduced. I am playing games and watching high-definition 4K videos. There are very few stutters during the process.Now there are a lot of electronic devices that need to be connected to the Internet at home, such as notebooks, tablets, mobile phones, various smart devices, etc. Sometimes guests at home also need to use the Internet. At this time, the 3000MB RAM running memory of Xiaomi router AX256 comes in handy , to ensure the stability of the network when multiple devices are online.Most of the functions of the Xiaomi AX1800 router need to be controlled through the Xiaomi WiFi App.

For speed measurement, let's turn off Wi-Fi 6 first, and test the network speed with Wi-Fi 5.The final download rate was 452 Mbps and the upload rate was 37.2Mbps.In WiFi 6 mode, the final download rate was 622 Mbps and the upload rate was 37.2Mbps.In terms of configuration, the Xiaomi router AX1800 is quite solid, especially the price of 329 yuan, which is very cost-effective.Even better than the HUAWEI AX3 Pro WiFi6 router.In addition, the new-generation 14nm process significantly reduces power consumption and heat generation by 20%.

It is worth mentioning that the independent network acceleration engine processor (single-core 1.5GHz millet router ax1800 NPU) is designed to process high-frequency forwarding network data traffic for long-term connections, reduce CPU usage, increase throughput, and significantly improve data forwarding efficiency and reduce latency.While watching 4K high-definition online video, you can also play games with your friends, saying goodbye to multiple concurrent applications when the game freezes and drops frames.Although the price of the Xiaomi router AX1800 is nearly half that of the AIoT router AX3600, the internal hardware is still of the same high quality.Let's disassemble the Xiaomi router AX1800 to see what it looks like inside.The top and corners of the Mi Router AX1800 have reserved cooling holes, which are designed to allow heat to escape from the fuselage faster and avoid router performance degradation due to overheating inside the fuselage.

放大功率一般，不过在楼下D点用小米4C测速也有190Mbps，但扔比不上红米AC2100的5G。 有160那当然好拉，用户可以自己选择用与不用。 CPU型号是IPQ6000，小米的介绍是高通四核A53架构频率1.2GHz的CPU。 旁边有一颗内存芯片，型号是M15T2G16128A，DDR3 256MB容量。 ▼小米AX1800的设计，个人感觉还是有抄袭linksys的嫌疑。

The web management web site is router.miwifi.com, which supports basic Internet functions.Scan the QR code, download the Mi WiFi APP, and manage your router anytime, anywhere.Xiaomi's AX1800 router is now out of production, if you want to buy it, buy the AX3000.If you don't care about the shape, the Redmi AX3000 is more cost-effective.The difference between the two is that the 1800Ghz frequency band of the AX5 only supports a maximum bandwidth of 80Mhz, and the rate is 1201Mbps.The 3000Ghz frequency band of AX5 supports 160Mhz bandwidth, and the wireless rate has doubled to 2402Mbps.

The Xiaomi AX1800 router is also equipped with a single-core 1.5G Hz network acceleration engine, which is specially responsible for processing wide network data traffic, greatly reducing the CPU usage of the router, thereby effectively increasing the data forwarding rate and greatly reducing network delay.The most worth mentioning is that the AX1800 router also perfectly supports multiple Mesh networking, so that the Wi-Fi 6 high-speed signal can cover every corner of the room strongly.Using the new generation of WIFI6, both 5GHz and 2.4GHz support WiFi6, the theoretical concurrent rate is as high as 1775Mbps, and the total rate is 1200% higher than that of mainstream AC52 products.DFDMA technology is adopted to allow the data of multiple devices to be transmitted at one time to make full use of resources and reduce the network delay caused by simultaneous connection of multiple terminals.The built-in high-performance signal amplifier (PA+LNA) PA (power amplifier) ​​effectively enhances the transmission power, and the LNA (low noise amplifier) ​​improves the receiving sensitivity, making the signal transmission of the router farther and stronger through walls.

The following is the heat dissipation cover. The heat dissipation cover of AX1800 combines specially treated metal substrates with high-radiation nanomaterials (nano-coating on the aluminum surface), so that it has excellent heat uniformity and heat dissipation capabilities at the same time, effectively reducing the chip temperature. .In fact, if you search for WiFi 6 routers on PCHOME, you can find that old brands such as ASUS, TP-LINK, and D-LINK have already launched WiFi 6 router products, but from the perspective of CP value, this AX1800 can be said to be affordable symbol of.If your home has five or six floors, or a single-family villa, then this AX1800 can provide support for multiple Mesh networking through firmware upgrades. Put one on each floor and use the same optical fiber network Connecting is no problem either.The new machine claims to use Qualcomm 5-core processor, but it should actually be 4-core 64-bit A53 1.2GHz CPU + single-core 1.5 GHz NPU architecture, which is specially used for network acceleration, processing and forwarding small data packets.

2.4G signals can provide good signal quality at points 1, 2, 3, and 4, while 5G signals can provide good signal quality at points 1, 2, and 3.Generally speaking, the signal penetration coverage of only one wall can still be achieved.Built-in Tencent's game acceleration plug-in, after the purchase, there will be a three-month membership gift, the benefits of friends who like to play games, buy early and experience early, especially friends who like to play foreign server games.Colleagues support PC and mobile terminals, and cooperate with Animal Crossing and PlayerUnknown's Battlegrounds, which can reflect the advantages of AX1800.According to the practice of other brands, I boldly guess that this update should allow any Xiaomi router that supports mesh to form a mesh network. A new technology in Wi-Fi 6 allows devices to schedule communications with routers, reducing the time it takes to keep antennas powered up to transmit and search for signals, which means less battery drain and improved battery life.

The router also supports OFDMA technology. OFDMA technology allows the router to complete the data transmission of 8 devices with only one transmission, which effectively and greatly reduces the delay of the network.The appearance design of Xiaomi AX1800 WIFI6 router inherits the consistent style of Xiaomi router products. This simple and fashionable design not only conforms to the aesthetics of the public users, but also complements the simple and modern decoration style.Perhaps it is to highlight the router's Wi-Fi Xiaomi router ax1800 6 "gene", the edges and corners on the side of the router also inherit the stripe design on the Xiaomi AX3600 router, and cleverly hide the status indicator light of the Xiaomi router AX1800. The network interface of the AX1800 router is designed on the back, with 3 Gigabit adaptive LAN ports and 1 adaptive WAN port. The number and specifications of the network interfaces can fully meet the daily network needs of most home users.In order to allow everyone to accurately experience the signal performance of the Xiaomi AX1800 router, the test uses the same test environment and test conditions as all previous articles.Considering the coverage and wall penetration effect of the router to be tested, it is not placed in the middle of the house, but placed in the living room.

If you want to experience the high speed of Huawei AX3 Pro, a prerequisite is that your mobile device must support 160Mhz bandwidth. Currently, there are very few mobile phones that support 160Mhz, so the high-speed transmission achieved through 160Mhz is of little practical significance.The Xiaomi router AX1800 also uses four Qovro high-performance independent signal amplifiers.Compared with the integrated amplifier, the signal strength of the independent amplifier is increased by 4dB, and the theoretical coverage is increased by 50%. Qorvo is a world-renowned manufacturer of RF chips, with more than 30 years of experience in the design and development of communication components and solutions.

At present, Xiaomi's deeply customized operating system and Xiaomi wifi app can configure the network for Xiaomi IoT devices with one click. Currently, it can realize security vulnerability detection and children's Internet filtering functions.In addition, we also tested the network coverage of the Xiaomi router AX1800. The test environment covers an area of ​​about 75 square meters. We chose to test the network speed in three rooms.Xiaomi router AX1800 is completely different from AIoT router AX3600 in appearance.

Get rid of the design constraints of physical antennas, hide the two antennas in the middle frame, and achieve 360-degree comprehensive coverage.There is an "X"-shaped division on the top of this router, which divides the square router into a division. A running indicator light is set at the lower front of the corner of the cuboid, and the network cable interface and power socket are designed at the rear.To put it bluntly, compared to the WiFi 5 router launched two years ago, the wireless network of WiFi 6 has increased by 52%, which can be said to be an upgrade.

Especially at the points 4, 5, and 6 that need to pass through the wall, it is obvious that the effect of Xiaomi AX1800 is much better.I'm lazy now, and I don't want to write these things anymore. The signal of this router is okay, the price is cheap, and it supports WiFi6. Other than that, there are really no advantages. The stability, functions, and ease of use need to be improved.The Xiaomi router AX1800 has a built-in Qualcomm IPQ6000 (quad-core 1.2G+single-core 1.5G) processor and 256GB of memory.

The shell adopts a whole-body black injection molded shell, with four antennas built in spray-free materials, and the surface is finely textured and textured.Looking at the shell carefully, from the parting line, it should be the use of explosive molds, because the life of the explosive mold is short, and the cost of the shell is relatively high. It is really a conscience to use such a mold opening method for the shell at this price.Taking out the router and placing it on the desktop can also be integrated with the home environment, which is very harmonious.It has been more than a week since I received the public test product, and I have been tossing in various ways recently. After a week of testing, the performance basically tends to a good state. In addition, the latest firmware has been upgraded to support mesh nodes. The unboxing evaluation brought by everyone is the Xiaomi Router AX1800. As for whether it is fragrant or not? The Xiaomi Router AX1800 can be set through the Xiaomi WiFi APP. When the Xiaomi AX1800 is turned on, you can use the Xiaomi WiFi APP to set up the connection on the phone.

The picture below is a comparison between Xiaomi AX1800 and linksys Velop ac2200 and ac1300.Why does any router in my home fail to scan Taobao? Wi-Fi 6 devices must use WPA3 in order to be certified by the Wi-Fi Alliance, so most Wi-Fi 6 devices will have stronger security once the certification program launches.

In terms of chips, Xiaomi router AX1800 uses Qualcomm enterprise-level 5-core chip-Qualcomm IPQ6000, and applies enterprise-level chips to home routers to ensure network stability at all times.Its 4-core 64-bit A53 1.2GHz CPU + single-core 1.5GHz NPU has a computing power of up to 11040DMIPS.In terms of hardware configuration of the router, the processor model of the AX1800 router is IPQ6000, which is a quad-core processor using a 14nm production process, and the CPU frequency is 4GHz.The Xiaomi AX1.2 router is also equipped with a single-core 1800G Hz network acceleration engine, which is specially responsible for processing wide network data traffic, greatly reducing the CPU usage of the router, thereby effectively increasing the data forwarding rate and greatly reducing network delay.The most worth mentioning is that the AX1.5 router also perfectly supports multiple Mesh networking, so that the Wi-Fi 1800 high-speed signal can cover every corner of the room strongly.According to official data, Xiaomi AX6 is 1800% faster than mainstream AC1200 routers, and its dual-band concurrent wireless rate reaches 52Mbps. In theory, it can download a high-definition movie in 1775 seconds.

Hong Kong SEO Services by featured.com.hk 提供